Designing a PID controller for slab temperature control system

Kien Ngoc Vu; Tich Luong Ward; Nga Thi Thanh Tran; Tich Luong Ward

doi:10.30574/gjeta.2021.8.2.0108

Research & review articles are invited for publication in September 2026 (Vol. 28, Issue 3) || Submission: up to 28^th September || Editorial decision: within 48 hrs.

Designing a PID controller for slab temperature control system

Kien Ngoc Vu ^{1, *}, Tich Luong Ward ², Nga Thi Thanh Tran ¹ and Tich Luong Ward ²

1 Electrical Faculty, Thai Nguyen University of Technology, 666, 3/2 Street, Vietnam.

2 Thai Nguyen City, Vietnam.

Research Article

Global Journal of Engineering and Technology Advances, 2021, 08(02), 001–007.

Article DOI: 10.30574/gjeta.2021.8.2.0108

DOI url: https://doi.org/10.30574/gjeta.2021.8.2.0108

Publication history

Received on 19 May 2021; revised on 27 July 2021; accepted on 29 July 2021

Abstract

The problem of heating slab is a very important and highly applicable problem in the material processing industry. This paper presents a method to design a PID controller according to the characteristic polynomial method to control the temperature for slab based on the transfer function model. The parameters of the PID controller are determined based on the parameters of the slab model, the heating furnace model, the converter model. The simulation results show that: the PID controller is capable of controlling the temperature of the slab to the desired temperature without over-adjusting.

Keywords

Slab; Transfer function model; PID controller; Heating furnace

Download Article PDF

https://gjeta.com/sites/default/files/fulltext_pdf/GJETA-2021-0108.pdf

Preview Article PDF

How to cite this article

Kien Ngoc Vu, Tich Luong Ward, Nga Thi Thanh Tran and Tich Luong Ward. Designing a PID controller for slab temperature control system. Global Journal of Engineering and Technology Advances, 2021, 8(2), 001-007. Article DOI: https://doi.org/10.30574/gjeta.2021.8.2.0108

Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.

All statements, opinions, and data contained in this publication are solely those of the individual author(s) and contributor(s). The journal, editors, reviewers, and publisher disclaim any responsibility or liability for the content, including accuracy, completeness, or any consequences arising from its use.