Home
Global Journal of Engineering and Technology Advances
International Peer reviewed Engineering Journal || Crossref DOI || Impact Factor 8.6 || ISSN: 2582-5003

Main navigation

  • Home
    • Journal Information
    • Editorial Board Members
    • Reviewer Panel
    • Abstracting and Indexing
    • Journal Policies
    • Our CrossMark Policy
    • Publication Ethics
    • Issue in Progress
    • Current Issue
    • Past Issues
    • Instructions for Authors
    • Article processing fee
    • Track Manuscript Status
    • Get Publication Certificate
    • Join Editorial Board
    • Join Reviewer Panel
  • Contact us
  • Downloads

Research & review articles are invited for publication in September 2026 (Vol. 28, Issue 3) || Submission: up to 28th September || Editorial decision: within 48 hrs.

Exergetic analysis of low gram nano-refrigerant charge for transport application

Breadcrumb

  • Home
  • Exergetic analysis of low gram nano-refrigerant charge for transport application

Luke Onyekwere Ajuka 1, * and Kamilu Moradeyo Odunfa 2

1 Department of Automotive Engineering, University of Ibadan, University of Ibadan, Ibadan, Nigeria.
2 Department of Mechanical Engineering, University of Ibadan, University of Ibadan, Ibadan, Nigeria.
 
Research Article
Global Journal of Engineering and Technology Advances, 2022, 12(03), 016–024.
Article DOI: 10.30574/gjeta.2022.12.3.0128
DOI url: https://doi.org/10.30574/gjeta.2022.12.3.0128
Received on 25 July 2022; revised on 07 September 2022; accepted on 09 September 2022
 
Limited gram charge is beneficial in transport refrigeration by sustenance of flammability limits for safety. Herein, an experimental investigation of 0.11 vol. % of titanium IV oxide doped with 30 g each of R600a and LPG as R6ooaAl2O3 and LPGAl2O3 nano-refrigerants were retrofitted into a 102g R134a vapour compression refrigerating system. At steady state, the performance of the system using unblended R134a, R600a, LPG refrigerants, R600aAl2O3 and LPGAl2O3 nano-refrigerants were examined as a function air evaporator temperature and compressor characteristics; discharge pressure, power consumption, compressor exergetic defect, coefficient of performance and exergetic efficiency. At 80g charge, R600a, LPG, R6ooaAl2O3 and LPGAl2O3 had higher COP; Exergetic efficiency; but lower Total exergetic defect of  2.9, 11.3, 9.7 and 14.1%; 19.4, 22.1, 31.8 and 29.4%; and 34.1, 43.6, 56.3 and 58.6% than R134a. R134a has higher discharge pressure of 0.25, 0.12, 0.77 and 0.84 Psia/ 0.77, 0.12, 0.84 and 0.25 Psia; higher power consumption of 14.79, 12.23, 27.83 and 26.51 Watts; higher compressor exergetic defect of 0.03, 0.03, 0.06 and 0.04 Joule, lower coefficient of performance of 0.06, 0.23, 0.71 and 1.18; and lower exergetic efficiency of 0.012, 0.008, 0.056, 0.062 Joule than R600a, LPG, R6ooaAl2O3, LPGAl2O3. motor compression work of unblended R134a refrigerant is higher than unblended R600a, unblended LPGAl2O3 blended in R600a and LPG by 15.28%, 16.08%, 37.73% and 40.43. All the selected refrigerants met the chill compartment temperature, ISO 8187 compartment standard of -2 ≤ tcc min, max ≤ +3, while R6ooaAl2O3 and LPG Al2O3 nano-refrigerants showed improved compressor characteristics.
 
Transport refrigeration; Flammability limits; Nano-refrigerants; Discharge temperature; Power consumption; Coefficient of performance
 
https://gjeta.com/sites/default/files/fulltext_pdf/GJETA-2022-0128.pdf

Preview Article PDF

Luke Onyekwere Ajuka and Kamilu Moradeyo Odunfa. Exergetic analysis of low gram nano-refrigerant charge for transport application. Global Journal of Engineering and Technology Advances, 2022, 12(3), 016-024. Article DOI: https://doi.org/10.30574/gjeta.2022.12.3.0128

Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.


All statements, opinions, and data contained in this publication are solely those of the individual author(s) and contributor(s). The journal, editors, reviewers, and publisher disclaim any responsibility or liability for the content, including accuracy, completeness, or any consequences arising from its use.

Get Certificates

Get Publication Certificate

Download LoA

Check Corssref DOI details

Issue details

Issue Cover Page

Editorial Board

Table of content

          

 

Copyright © 2026 Global Journal of Engineering and Technology Advances - All rights reserved

Developed & Designed by VS Infosolution