Experimental investigation of the performance and emission of low-speed diesel engine using various bio diesel blends at variable load conditions: (Part II)

Rashed D Alnazal; M. Abuzaid

doi:10.30574/gjeta.2023.15.2.0083

Research & review articles are invited for publication in September 2026 (Vol. 28, Issue 3) || Submission: up to 28^th September || Editorial decision: within 48 hrs.

Experimental investigation of the performance and emission of low-speed diesel engine using various bio diesel blends at variable load conditions: (Part II)

Rashed D Alnazal ¹ and M. Abuzaid ^{2, *}

1 Mutah University, Jordan.

2 Faculty of Engineering, Mutah University, Jordan.

Research Article

Global Journal of Engineering and Technology Advances, 2023, 15(02), 052–059.

Article DOI: 10.30574/gjeta.2023.15.2.0083

DOI url: https://doi.org/10.30574/gjeta.2023.15.2.0083

Publication history

Received on 23 March 2023; revised on 06 May 2023; accepted on 09 May 2023

Abstract

The purpose of this study is to experimentally investigate the performance and emission of compression ignition engine using biodiesel extracted from waste cooking oils (WCO), such as (falafel frying oil; origin from palm oil , chicken frying oil; origin from soybean oil), and fresh oils such as (soybean oil, olive oil), after produce biodiesel from WCO and fresh oils, will be blending with pure diesel in two percentage are B20 ( 20% biodiesel from each type, 80% pure diesel), B10 (10% biodiesel from each type , 90% pure diesel). The biodiesel blends were used as an alternative fuel for diesel engine. After that, they were compared to pure diesel B00 (0% biodiesel, 100%pure diesel) at engine variable load from (0-6 kW) at constant speed of (2000 RPM). For engine performance, (Brake power, brake specific fuel consumption, brake thermal efficiency) were analyzed. Also, for emissions, (, exhaust gas temperatures to indicate NOx) were analyzed. The results showed that pure diesel produces higher brake force (BP) than all biodiesel blends. The highest value for BSFC is for B20-F (20% biodiesel from falafel frying oil, 80% pure diesel) is equal (0.243426 gm/kW.s). The highest value for brake thermal efficiency BTE is for B10-S (10% biodiesel from soybeans oil, 90% pure diesel) is equal 27.6%. The B10-S produces the highest value of NOx. In addition, pure diesel produces higher emissions than all biodiesel blends. All biodiesel blends produce higher emissions than pure diesel.

Keywords

Biodiesel; Diesel engine; Waste cooking oil; Performance; Emissions

Download Article PDF

https://gjeta.com/sites/default/files/fulltext_pdf/GJETA-2023-0083.pdf

Preview Article PDF

How to cite this article

Rashed D Alnazal and M. Abuzaid. Experimental investigation of the performance and emission of low-speed diesel engine using various bio diesel blends at variable load conditions: (Part II). Global Journal of Engineering and Technology Advances, 2023, 15(2), 052-059. Article DOI: https://doi.org/10.30574/gjeta.2023.15.2.0083

Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.

All statements, opinions, and data contained in this publication are solely those of the individual author(s) and contributor(s). The journal, editors, reviewers, and publisher disclaim any responsibility or liability for the content, including accuracy, completeness, or any consequences arising from its use.