Home
Global Journal of Engineering and Technology Advances
International Peer reviewed Engineering Journal || Crossref DOI || Impact Factor 8.6 || ISSN: 2582-5003

Main navigation

  • Home
    • Journal Information
    • Editorial Board Members
    • Reviewer Panel
    • Abstracting and Indexing
    • Journal Policies
    • Our CrossMark Policy
    • Publication Ethics
    • Issue in Progress
    • Current Issue
    • Past Issues
    • Instructions for Authors
    • Article processing fee
    • Track Manuscript Status
    • Get Publication Certificate
    • Join Editorial Board
    • Join Reviewer Panel
  • Contact us
  • Downloads

Research & review articles are invited for publication in September 2026 (Vol. 28, Issue 3) || Submission: up to 28th September || Editorial decision: within 48 hrs.

Application of basic drying theory to determine drying mass constants of selected seafoods

Breadcrumb

  • Home
  • Application of basic drying theory to determine drying mass constants of selected seafoods

Orua Okon Antia 1, * , William Adebisi Olosunde 1 and Emem Orua Antia 2

1 Department of Agricultural and Food Engineering, University of Uyo, Nigeria.
2 Department of Chemical and Petroleum Engineering, University of Uyo, Nigeria.
 
Research Article
Global Journal of Engineering and Technology Advances, 2021, 07(01), 137-143.
Article DOI: 10.30574/gjeta.2021.7.1.0062
DOI url: https://doi.org/10.30574/gjeta.2021.7.1.0062
Received on 14 March 2021; revised on 18 April 2021; accepted on 21 April 2021
 
The drying of seafood could ensure increase in life span, minimization of storage space, ease of transportation, etc of the product. It is therefore, necessary to dry and know when to stop drying at an appropriate moisture content that would minimize associated challenges in promoting food security. In this study, selected sea foods, such as prawn and oyster were obtained and then dried to determine their drying mass constants using model equation developed based on basic drying principle. The value of the constants obtained would provide data bank to facilitates prediction of mass of the drying material at given time that would correspond to any desired moisture content, provided the initial moisture content of the material is known. The plots of moisture content against drying time, drying rate against drying time and moisture content versus were carried out. It was observed that increase in size of the drying material increased the drying time. Moreover, the drying rate curve resembles a typical drying curve. Hence, the experimental values obtained are reliable. Technical analysis showed that the drying mass constants for prawn and oyster are 0.2950 ± 0.0119 and 0.2453 ± 0.0476, respectively.
 
Drying mass constant; Moisture content; Model equation; Seafood.
 
https://gjeta.com/sites/default/files/fulltext_pdf/GJETA-2021-0062.pdf

Preview Article PDF

Orua Okon Antia, William Adebisi Olosunde and Emem Orua Antia. Application of basic drying theory to determine drying mass constants of selected seafoods. Global Journal of Engineering and Technology Advances, 2021, 7(1), 137-143. Article DOI: https://doi.org/10.30574/gjeta.2021.7.1.0062

Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.


All statements, opinions, and data contained in this publication are solely those of the individual author(s) and contributor(s). The journal, editors, reviewers, and publisher disclaim any responsibility or liability for the content, including accuracy, completeness, or any consequences arising from its use.

Get Certificates

Get Publication Certificate

Download LoA

Check Corssref DOI details

Issue details

Issue Cover Page

Editorial Board

Table of content

          

 

Copyright © 2026 Global Journal of Engineering and Technology Advances - All rights reserved

Developed & Designed by VS Infosolution