Replacement analysis of ceramic insert by CBN insert in vertical lathe

Renann P. Gama; Ramon O. B. Santos; Adriano C. M. Rosa; Any M. Rosa; Bruno S. G. Silva; William G. Amorim

doi:10.30574/gjeta.2022.11.1.0067

Research & review articles are invited for publication in September 2026 (Vol. 28, Issue 3) || Submission: up to 28^th September || Editorial decision: within 48 hrs.

Replacement analysis of ceramic insert by CBN insert in vertical lathe

Renann P. Gama ^{1, 3}, Ramon O. B. Santos ^{1, *}, Adriano C. M. Rosa ^{2, 4}, Any M. Rosa ⁴, Bruno S. G. Silva ¹ and William G. Amorim ¹

1 Department of Mechanical Engineering, Salesian University Center of São Paulo - UNISAL, Lorena, São Paulo, Brazil.

2 Federal University of Itajubá (UNIFEI), Itajubá, Minas Gerais, Brazil.

3 Department of Materials Engineering, São Paulo State University - UNESP, Guaratinguetá, São Paulo, Brazil.

4 State College of Technology - FATEC, Guaratinguetá, São Paulo, Brazil.

Research Article

Global Journal of Engineering and Technology Advances, 2021, 11(01), 058–071.

Article DOI: 10.30574/gjeta.2022.11.1.0067

DOI url: https://doi.org/10.30574/gjeta.2022.11.1.0067

Publication history

Received on 02 March 2022; revised on 06 April 2022; accepted on 08 April 2022

Abstract

This work analyzes replacing an insert made of ceramic with an insert made of CBN (Cubic Boron Nitride). The inserts are cutting tools used in machining. We will start by presenting a brief account of what machining is, what is applicable in this research and the properties of the two cutting tools. We will also include our objective and justification for carrying out the project. Next, we will describe all of the equipment and tools used in the process to verify results, detailing the function of each one. We will explain our method step by step and show the properties of each insert and their use. We will compare the inserts during operations, and some results will be analyzed graphically in order to obtain a better picture of the behavior of the inserts. We will finish the paper by summarizing and calculating the results, on a cost-benefit ratio, thereby allowing us to determine the most viable replacement insert for use in industry.

Keywords

Inserts; Ceramics; CBN; Machining; Tool; Vertical Turning

Download Article PDF

https://gjeta.com/sites/default/files/fulltext_pdf/GJETA-2022-0067.pdf

Preview Article PDF

How to cite this article

Renann P. Gama, Ramon O. B. Santos, Adriano C. M. Rosa, Any M. Rosa, Bruno S. G. Silva and William G. Amorim. Replacement analysis of ceramic insert by CBN insert in vertical lathe. Global Journal of Engineering and Technology Advances, 2022, 11(1), 058-071. Article DOI: https://doi.org/10.30574/gjeta.2022.11.1.0067

Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.

All statements, opinions, and data contained in this publication are solely those of the individual author(s) and contributor(s). The journal, editors, reviewers, and publisher disclaim any responsibility or liability for the content, including accuracy, completeness, or any consequences arising from its use.