Home
Global Journal of Engineering and Technology Advances
International Peer reviewed Engineering Journal || Crossref DOI || Impact Factor 8.6 || ISSN: 2582-5003

Main navigation

  • Home
    • Journal Information
    • Editorial Board Members
    • Reviewer Panel
    • Abstracting and Indexing
    • Journal Policies
    • Our CrossMark Policy
    • Publication Ethics
    • Issue in Progress
    • Current Issue
    • Past Issues
    • Instructions for Authors
    • Article processing fee
    • Track Manuscript Status
    • Get Publication Certificate
    • Join Editorial Board
    • Join Reviewer Panel
  • Contact us
  • Downloads

Research & review articles are invited for publication in September 2026 (Vol. 28, Issue 3) || Submission: up to 28th September || Editorial decision: within 48 hrs.

Adaptive particle swarm optimization approach to simultaneous reconfiguration and shunt capacitor allocation in radial distribution network

Breadcrumb

  • Home
  • Adaptive particle swarm optimization approach to simultaneous reconfiguration and shunt capacitor allocation in radial distribution network

Ismail Adeyemi ADEYEMO *, Oluwadare Olatunde AKINROGUNDE, Sunday Adeleke SALIMON and Oluwaseyi Wasiu ADEBIYI

Department of Electronic & Electrical Engineering, Ladoke Akintola University of Technology, PMB 4000, Ogbomoso, Oyo State, Nigeria.
 
Research Article
Global Journal of Engineering and Technology Advances, 2022, 12(03), 077–094.
Article DOI: 10.30574/gjeta.2022.12.3.0162
DOI url: https://doi.org/10.30574/gjeta.2022.12.3.0162
Received on 16 August 2022; revised on 22 September 2022; accepted on 24 September 2022
 
Simultaneous radial distribution network reconfiguration (RDNR) and shunt capacitor allocation (SCA) is one of the compensation techniques that are used for getting an improved radial structure with reduced real power loss and enhanced voltage stability. This study presents a novel adaptive particle swarm optimisation (APSO) technique for the simultaneous RDNR and SCA, which is a complex and nonlinear optimisation problem. Unlike the conventional particle swarm optimization (PSO) technique in which an initial population of particles is randomly generated, the fundamental loop concept is used to populate the search space of APSO with the candidate branches for each tie switch (open branch) in the loop. The candidate branches are preselected with the graph theory. This is done to mitigate infeasible configurations in the optimization process and also to ensure that the conditions for radiality of the network are satisfied.  The effectiveness of the proposed APSO technique for simultaneous RDNR and SCA is demonstrated on the standard IEEE 33-bus and Nigerian Ayepe 34-bus RDNs using six event cases. The efficacy of the proposed APSO technique is further validated with the comparison of the observed simulation results with the reported results of similar work implemented with established algorithms like improved binary particle swarm optimization (IBPSO), modified pollinated flower algorithm (MFPA) and mixed integer linear programming (MILP). The result of the comparative study reveals that the proposed APSO technique outperforms the selected algorithms in most of the considered event cases.
 
Adaptive PSO; Radial distribution network; Reconfiguration; Power loss; Shunt capacitor allocation
 
https://gjeta.com/sites/default/files/fulltext_pdf/GJETA-2022-0162.pdf

Preview Article PDF

Ismail Adeyemi ADEYEMO, Oluwadare Olatunde AKINROGUNDE, Sunday Adeleke SALIMON and Oluwaseyi Wasiu ADEBIYI. Adaptive particle swarm optimization approach to simultaneous reconfiguration and shunt capacitor allocation in radial distribution network. Global Journal of Engineering and Technology Advances, 2022, 12(3), 077-094. Article DOI: https://doi.org/10.30574/gjeta.2022.12.3.0162

Copyright © Author(s). All rights reserved. This article is published under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, sharing, adaptation, distribution, and reproduction in any medium or format, as long as appropriate credit is given to the original author(s) and source, a link to the license is provided, and any changes made are indicated.


All statements, opinions, and data contained in this publication are solely those of the individual author(s) and contributor(s). The journal, editors, reviewers, and publisher disclaim any responsibility or liability for the content, including accuracy, completeness, or any consequences arising from its use.

Get Certificates

Get Publication Certificate

Download LoA

Check Corssref DOI details

Issue details

Issue Cover Page

Editorial Board

Table of content

          

 

Copyright © 2026 Global Journal of Engineering and Technology Advances - All rights reserved

Developed & Designed by VS Infosolution