Experimental investigation of GTA Welded SS316L plates using shape memory alloy as a filler material
1 Department of Mechanical Engineering, P V P Siddhartha Institute of Technology, Kanuru, Vijayawada, Andhra Pradesh, India.
2 Department of Mechanical Engineering, University college of Engineering and Technology, Acharya Nagarjuna University, Guntur, Andhra Pradesh, India.
Research Article
Global Journal of Engineering and Technology Advances, 2021, 06(03), 042-048.
Article DOI: 10.30574/gjeta.2021.6.3.0033
Publication history:
Received on 23 January 2021; revised on 27 February 2021; accepted on 02 March 2021
Abstract:
Parameter optimization is the active subject of research, and in this current work the ferrite number and gas tungsten arc (GTA) welding SS. Filler material. Models have been developed by welding SD316L slab with NiTinol wire (shape memory alloy) as a filler material by conducting experiments using three-factor, three level factorial designs. Tests have been conducted for various models at UTM and the results are scheduled. The final models were upgraded using the design expert method. It can be seen from the investigation that the interactive effect of the process parameters has a significant effect on the tensile strength and the ferrite number.
Keywords:
NiTinol; SS316L; GTA welding; Design Expert Optimization.
Full text article in PDF:
Copyright information:
Copyright © 2021 Author(s) retain the copyright of this article. This article is published under the terms of the Creative Commons Attribution Liscense 4.0